1 Because of its unique steel frame, our base system requires a minimal amount of digging. All that is required is a series of small concrete pads.
2 The SpeedyBase frame is assembled, levelled and bolted to the exterior wall. The modular walls are then bonded and bolted to the frame.
3 Electrics and central heating pipes can be easily concealed within the specially designed wall cavity in the modular wall base system.
4 Walls are fitted with additional insulation if required and the internal wall panels are fitted. The conservatory windows, doors and roof are fitted as in a conventional installation.
- Reduces site disruption and mess to a minimum
- No large scale excavations and soil removal
- No large scale cement mixing and building work
- Ideal for use where site access is difficult
- Eliminates the need to move manholes and drains
- A good solution for uneven and sloping sites
- Can be installed all year round, in all weathers
- Delivered direct to site, complete with insulated floor
- Ideal for use with under floor heating systems
- Designed to BSI Standard
- Conforms to building regulations
- Speedy base can be fitted to first floor installations
Why is SPEEDYBASE better than more traditional systems?
It’s quicker, easier, cleaner, cost effective and more straight forward to install than traditional building techniques. It’s also covered by the 25 year guarantee and is JHAI approved. If that’s not enough, see more reasons below why SPEEDYBASE is better than a traditional, wet system:
If you choose our foundation base construction, your conservatory can be built quickly and easily on pad foundations. Once a steel frame base has been installed, real brick modular walls can be put together in a matter of hours.
The possibility of doing much of the work yourself cuts the cost of the project, an important factor for budget-conscious homeowners.
Less mess, less waste!
SPEEDYBASE arrives in kit form and is suitable for both professional and DIY construction. The only foundations required are a number of concrete pads placed at strategic points around the base. This means far less excavation work and waste material to dispose of compared to other methods of base construction.
A cost effective solution
No need for expensive relocating of manholes or drains. When work is required in tight spaces, traditional foundations would need deeper excavation. SPEEDYBASE can work around existing structures.
Worry-free with our warranty
A 25 year guarantee gives you peace of mind with SPEEDYBASE and what’s better still is that this is standard across all our products.
Longer build time
With a wet system, there is a need to employ a professional for the duration of the construction, which can take weeks, and increases the cost of the project.
Traditional, wet systems are often messy and require extra equipment to complete. This can cause complexities if access to the rear of the property is tight as well as the need to have further employees on site to help with multiple deliveries and stages of the build. This method is also dependent on multiple product deliveries turning up on time turning homes into building sites. You can also experience hold ups due to wet and cold weather.
Longer building control cycle
SPEEDYBASE is JHAI single story approved so you can avoid needless building control issues which can delay your extension.
Difficult sites = difficult builds
Unlike with SPEEDYBASE, if you have uneven or sloping sites or maybe a site with difficult access? This can cause issues during build process including delays, and further costs incurred.